BiSS interface iCs
iC-Haus' BiSS iCs provide on-chip integrated functionality suitable for the interface of a BiSS device, making it quick and easy to implement BiSS into your products like sensors, encoders and controllers.
BiSS Master and Slave iCs with integrated transceivers are available, as well as a watchdog for BiSS Safety and also the new standard BiSS Line.
Applications:
- BiSS Master devices
- BiSS Slave devices
- BiSS Safety devices
- BiSS Line devices
iC-Haus BiSS interface iCs:
iC-BL
|
BiSS Line Interface Master/Slave with RS485 Transceiver
Key Features:
- BiSS Line slave or master
- 2- and 4-wire BiSS Line interface support
- Full BiSS Line protocol support including Forward Error Correction (FEC)
- Isochronous position data measurement with low jitter
- On-chip RS485 line transceiver for BiSS Line point-to-point and bus structures
- BiSS Line to BiSS C protocol transfer
- Digital I/O port with CMOS drivers/receivers
- Sensor-sided BiSS C master interface for daisy-chaining up to 8 BiSS C slaves with data lengths up to 64 bits each
- Full compatibility with BiSS C and BiSS Safety
- SSI master interface
- SPI slave and SPI master interface
- I²C master interface
- Sensor supply voltage: 2.5 V, 3.3 V, or 5 V (max. 200 mA)
- Operation at 5 V or from 7 V to 30 V supply
- Operating temperature range of –40°C to +105°C
Applications:
- One-cable technology BiSS Line master or slave implementations
- 2- and 4-wire sensor interfaces
- Motor feedback
- Position sensing
- Robotics
- Long distance SPI links
- Robust multi-sensor data communication
- BiSS C to BiSS Line adapter
- Device diagnosis and condition monitoring
 Download iC-BL Flyer (Chinese)
Download iC-BL technical documentation
Download material about iC-BL Evaluation Kits and Tools
Download iC-BL Software
More information about iC-BL (iC-Haus website in English)
|
|
iC-MB4
|
BiSS Interface Master, 2 channel, 8 slaves, RS-422 transceiver, dual SPI
Key Features:
- Bidirectional BiSS communication with up to 8 slaves
- Supports BiSS C, BiSS B, SSI and extended SSI
- Synchronous acquisition with data rates up to 10 Mbit/s
- Configurable interface with TTL, CMOS, RS422 or LVDS
- Slave register operations during cyclic data transfers
- Automatic line delay compensation
- Data lengths of up to 64 bit for sensor data per slave
- CRC verification with up to 16 bits per slave
- 64 bytes memory for bidirectional register access
- SPI or parallel interface to host e.g. microcontroller
- Single 3 V to 5 V supply
Applications:
- Device communication in multi-sensor sytems
- Position acquisition with encoders
- Drives and motor-feedback systems
Download iC-MB4 Flyer (Chinese)
Download iC-MB4 technical documentation
Download material about iC-MB4 Evaluation Kits and Tools
Download iC-MB4 Software
BiSS-C Protocol Description
BiSS-C Protocol Description (Chinese)
More information about iC-MB4 (iC-Haus website in English)
|
|
iC-MCB
|
SPI-to-BiSS bridge with RS-422 transceiver
Key Features:
- BiSS Interface slave
- Full BiSS protocol support
- Two data channel configurable
- Three slave ID occupiable
- Single cycle data buffer of 64 byte organized in multiple banks for simultaneous access
- Built-in control communication
- RS422 line driver/receiver for BiSS/SSI point-to-point network
- BiSS bus structure capable
- SPI slave interface for sensor data provided by microcontroller
- BiSS safety related features (16 bit CRC + CRC start value)
- BiSS timeout: adaptive, 2 μs, 20 μs
- SSI protocol support
- Operation from 3.0 V to 5.5V
- Operating temperature range of -40°C to +125°C
- Space-saving 16-pin QFN package
Applications:
- BiSS slave implementation
- Multiple sensor devices
- Encoder
- Torque sensor
- Inclinometer
- Acceleration sensor
- Safety light curtain
- BiSS diagnosis extension
- Condition monitoring extension
Download iC-MCB Flyer (Chinese)
Download iC-MCB technical documentation
Download material about iC-MCB Evaluation Kits and Tools
Download iC-MCB Software
BiSS-C Protocol Description (Chinese)
More information about iC-MCB (iC-Haus website in English)
|
|
iC-MCW
|
BiSS Watchdog for RS422 with SPI
Key Features:
- Acquisition of BiSS Single Cycle Data
- Acquisition of BiSS Control Data
- Monitoring of BiSS communication status
- Error diagnostics for debugging
- Pin for simple error indication
- Auto compensation of line delay and conversion times
- Internal 14-bit BiSS frame counter
- Built-In RS422 receiver for direct BiSS interfacing
- Support of BiSS data transfer rates of up to 10 MBit/s
- Serial controller communication via SPI™ slave interface
- Support of interrupt-output
- Built-In system and high speed sample clock generation
- 3.3 to 5 V supply (+/-10%)
- Operational temperature -40 to +125 °C
Applications:
- BiSS communication monitoring
- BiSS Safety extension of BiSS standard drives
Download iC-MCW Flyer (Chinese)
Download iC-MCW technical documentation
Download material about iC-MCW Evaluation Kits and Tools
Download iC-MCW Software
BiSS-C Protocol Description (Chinese)
More information about iC-MCW (iC-Haus website in English)
|
Return to products page
中文
