English

• 主页
• 新闻
• 产品
• BiSS 接口
• 下载
• 视频
• 关于我们
• 联系

iC-Haus 激光二极管驱动器覆盖各种激光二极管，用CW或脉冲操作。

此芯片提供快速开关，使用iC-Haus专利电路免尖峰，带安全监控功能。产品覆盖不同激光驱动控制模式，例如稳定电流或稳定激光功率 (需要带监控二极管的激光二极管)。

应用:

• 工业传感器
• 条形码扫码器
• 激光水准测量
• 激光打印机/复印机
• 激光指示笔

下载激光管和发光管驱动器芯片选型表

iC-Haus 激光二极管和发光二极管驱动器芯片:

iC-HG	200 MHz 激光开关, 最高达 9 A 电流 (脉冲) 特性: Six channel laser switch from CW up to 200 MHz CW operation with up to 500 mA per channel (1.5 A pulsed) Spike-free switching of the laser current TTL inputs (6 x 1 channel) or LVDS inputs (3 x 2 channels) Operates as six independent voltage-controlled current sinks Switching outputs (LDKx) are 12 V capable for blue laser diodes Fast and slow switching mode Simple current control at pins CIx Wide supply voltage range from 3 to 5.5 V Parallel connected channels for up to 3 A operation (9 A pulsed) from a single IC Multiple iC-HG in parallel for even higher currents Open drain error output, thermal shutdown 应用: Pump lasers Laser projection Laser TV Camera lighting TOF (Time-Of-Flight) lighting LIDAR lighting 下载 iC-HG 简单介绍 下载 iC-HG 数据手册 下载评估板说明 iC-HG HG2M 下载评估板说明 iC-HG HG8M 下载适配板说明 HG2D 下载封装资料 DFN, QFN 更多信息关于 iC-HG (iC-Haus 英文网站)
iC-HG30	250 MHz 激光开关, 最高达 30 A 电流 (脉冲) 特性: Six channel laser switch from CW up to 250 MHz CW operation with up to 1 A per channel Pulsed operation with up to 5 A per channel Spike-free switching of the laser current 6 x 1 channels with TTL inputs 3 x 2 channels with LVDS inputs Operates as six independent voltage controlled current sinks Outputs (LDKx) are 30 V capable for stacked laser diodes Simple current control at pins CIx CIx voltage < 3 V for full CW current Wide supply voltage range from 3 to 5.5 V All channels can be paralleled for up to 6 A CW and 30 A pulsed operation Open drain error output Thermal shutdown 应用: TOF camera lighting LIDAR lighting Pump lasers Laser projection Laser TV Data transmission Camera lighting 下载 iC-HG30 简单介绍 (中文版) 下载 iC-HG30 简单介绍 (英文版) 下载 iC-HG30 数据手册 更多信息关于 iC-HG30 (iC-Haus 英文网站)
iC-HGP	200 MHz 高端激光开关, 最高达 9A 电流 (脉冲) - (新) 特性: Six channel laser switch from CW up to 200 MHz CW operation with up to 500 mA per channel (1.5 A pulsed) Spike-free switching of the laser current TTL inputs (6 x 1 channel) or LVDS inputs (3 x 2 channels) Operates as six independent voltage-controlled current sources Laser supplies are 12 V capable for blue/green laser diodes Fast and slow switching mode Simple current control at pins CIx Wide supply voltage range from 3 to 5.5 V Parallel connected channels for up to 3 A operation (9 A pulsed) from a single IC Multiple iC-HG in parallel for even higher currents Open drain error output, thermal shutdown 应用: Pump lasers Laser projection Laser TV Data transmission TOF (Time-Of-Flight) lighting LIDAR lighting 下载 iC-HGP 数据手册 更多信息关于 iC-HGP (iC-Haus 英文网站)
iC-HK 系列	155 MHz 双通道无尖峰激光开关 特性: Laser switch for frequencies from CW up to 155 MHz Spike-free switching of the laser current Dual switching inputs with independent current control Operates as a voltage-controlled current source Pulsed operation with up to 700 mA per channel CW operation with up to 150 mA per channel Simple power control at pin CI Thermal shutdown Supplement to iC-WK/L for pulsed operation iC-HKB for driving blue laser diodes 应用: Data transmission Laser scanning devices Optical storage devices 下载 iC-HK(B) 简单介绍 下载 iC-HK / iC-HKB 数据手册 下载 iC-HK 应用笔记 下载封装资料 MSOP, SSOP, TSSOP 下载封装资料 SO 更多信息关于 iC-HK / iC-HKB (iC-Haus 英文网站)
iC-HN 系列	快脉冲 1.4/2.8 A 激光驱动器 特性: Pulsed operation with up to 1.4/2.8 A Spike-free switching of the laser current Operates as switched, voltage-controlled current sink Up to 30 V laser supply voltage LVDS switching input 应用: TOF Range Finders LIDAR 3D scanning Gesture recognition IR security illumination 下载 iC-HN 系列简单介绍 (中文版) 下载 iC-HN 系列简单介绍 (英文版) 下载 iC-HN 数据手册 下载 iC-HN3 数据手册 下载评估板说明 HN1M 更多信息关于 iC-HN 系列 (iC-Haus 英文网站)
iC-HS 系列	超短快脉冲激光驱动器 - (新) 特性: Pulse width from 100 ps up to 5 ns with 1 ps resolution Temperature-stabilized on-chip pulse generation Peak laser current up to 200 mA (iC-HS02) or 500 mA (iC-HS05) LVDS or TTL synchronization output with programmable delay LVDS or TTL trigger input Up to 200 MHz repetition frequency in LVDS mode 应用: TOF Range Finders Short Range LIDAR 3D scanning Fluorescence spectroscopy 下载 iC-HS 系列简单介绍 (中文版) 下载 iC-HS 系列简单介绍 (英文版) 更多信息关于 iC-HS 系列 (iC-Haus 英文网站)
iC-HT	双通道CW激光管驱动器, 带SPI/I2C控制器接口 特性: Dual CW with up to 750 mA per channel, parallel up to 1.5 A 2.8 V to 11 V power supply Operation with or without microcontroller Individual enable input per channel Control loop accuracy better than 1 % Internal programmable logarithmic monitor resistor Operating point setup with 10 bit logarithmic resolution Current or light-power control (ACC or APC) selectable per channel Dual A/D converter for analog levels monitoring Serial programming interface (SPI or I2C compliant) Laser channel disable with programmable overcurrent threshold Low drop linear regulator for 3.3 V Optimized for N-type laser diodes 应用: Laser diode modules CW laser diode driver Embedded laser diode controller Safety oriented laser controller 下载 iC-HT 简单介绍 下载 iC-HT 数据手册 下载评估板说明 HT1D 下载 iC-HT 软件 (无RTE) 下载 iC-HT 软件 (带RTE) 更多信息关于 iC-HT (iC-Haus 英文网站)
iC-HTG	CW 功率激光二极管驱动器 特性: CW operation with external driver transistor ACC mode configurable with shunt APC mode configurable with monitor diode 3.3 to 24 V power supply Optimized for both N-type and P-type laser diodes Analog modulation frequency of up to 50 kHz Load current monitoring with shunt possible Internal programmable logarithmic monitor resistor Operating point setup with a 10 bit logarithmic resolution Serial programming interface (SPI or I2C compliant) Configuration content verifiable and activatable A/D converters for analog signal monitoring Low drop linear regulator for 3.3 V Low current standby mode Temperature monitor Operational Temperature -40 to +85 °C 应用: Commercial VCSEL/LED/Laser diode modules Safety related CW laser diode drivers Structured-light 3D illumination Laser diode stack control Optical amplification, optical pumping 下载 iC-HTG 简单介绍 (中文版) 下载 iC-HTG 简单介绍 (英文版) 下载 iC-HTG 数据手册 下载评估板说明 HTG1D 下载 iC-HTG 软件 (无RTE) 下载 iC-HTG 软件 (带RTE) 更多信息关于 iC-HTG (iC-Haus 英文网站)
iC-HTP	双通道P-型激光管CW驱动器, 最高达 1.5A 电流 特性: Dual CW with up to 750 mA per channel, parallel up to 1.5 A 2.8 V to 11 V power supply Operation with or without microcontroller Individual enable input per channel Control loop accuracy better than 1 % Internal programmable logarithmic monitor resistor Operating point setup with 10 bit logarithmic resolution Current or light-power control (ACC or APC) selectable per channel Dual A/D converter for analog levels monitoring Serial programming interface (SPI or I2C compliant) Laser channel disable with programmable overcurrent threshold Low drop linear regulator for 3.3 V Optimized for P-type laser diodes or dual common cathode Low-power standby mode On-chip temperature sensing 应用: Laser diode modules CW laser diode driver Embedded laser diode controller Safety oriented laser controller Structed-light 3D illuminations Multiple laser diode control 下载 iC-HTP 简单介绍 下载 iC-HTP 数据手册 下载评估板说明 HTP1D 下载 iC-HTP 软件 (无RTE) 下载 iC-HTP 软件 (带RTE) 更多信息关于 iC-HTP (iC-Haus 英文网站)
iC-HV	VCSEL 阵列驱动器 特性: Triple VCSEL switch from CW up to 200 MHz Chip-on-chip assembly of the VCSEL array onto the iC-HV CW operation with up to 1 A per switch Pulsed operation with up to 3 A per switch Inputs can be paralleled for full 3 A CW and 9 A pulsed current Spike-free switching of the VCSEL current TTL or LVDS switching inputs Operates as three switched, voltage-controlled current sinks Simple current control at pins CIx Wide supply voltage range from 3 to 5.5 V Open drain error output, thermal shutdown 应用: Laser Illumination Camera lighting TOF camera lighting Gesture recognition LIDAR lighting 下载 iC-HV 数据手册 下载 iC-HVxxxV 数据手册 下载评估板说明 HV1M 下载适配板说明 HG2D 更多信息关于 iC-HV (iC-Haus 英文网站)
iC-NZN	N-型激光管驱动器, APC(自动控制功率) 和 ACC(自动控制电流) 模式 特性: Peak value controlled laser diode driver for operation from CW up to 155 MHz Spike-free switching of laser currents of up to 300 mA Setting of laser power (APC) via external resistor Optional current control (ACC) Laser current limitation Safety shutdown with overtemperature Error signal output with overtemperature, undervoltage and overcurrent All current LD types can be used (N/P/M configurations) Blue laser diodes supported 应用: Pulsed and CW LD modules Laser pointers Laser levels Bar-code readers Distance measurement Blue laser diodes 下载 iC-NZN/iC-NZP 简单介绍 下载 iC-NZN 数据手册 下载封装资料 DFN, QFN 更多信息关于 iC-NZN (iC-Haus 英文网站)
iC-NZP	P-型激光管驱动器, APC(自动控制功率) 和 ACC(自动控制电流) 模式 特性: Peak value controlled laser diode driver for operation from CW up to 155 MHz Spike-free switching of laser currents of up to 300 mA Setting of laser power (APC) via external resistor Optional current control (ACC) Laser current limitation Safety shutdown with overtemperature Error signal output with overtemperature, undervoltage and overcurrent All current LD types can be used (N/P/M configurations) 应用: Pulsed and CW LD modules Laser pointers Laser levels Bar-code readers Distance measurement 下载 iC-NZN/iC-NZP 简单介绍 下载 iC-NZP 数据手册 下载封装资料 DFN, QFN 更多信息关于 iC-NZP (iC-Haus 英文网站)
iC-WJ 系列	CW和脉冲操作至 300 kHz 激光管驱动器 特性: Simple APC adjustment via an external resistor Continuous (CW) or pulsed operation of up to 300 kHz Laser diode current of up to 250 mA Adjustable watchdog for input signals Soft power-on, thermal shutdown and low voltage protection Two monitor current ranges available: iC-WJ with 50 to 500 µA and iC-WJZ with 0.15 to 1.5 mA 5 V single supply operation 应用: General purpose LD driver 下载 iC-WJ / iC-WJZ 数据手册 下载 Application Note 下载封装资料 MSOP, SSOP, TSSOP 下载封装资料 SO 更多信息关于 iC-WJ / iC-WJZ (iC-Haus 英文网站)
iC-WJB	激光管驱动器用于 2.7 V 到 6 V 电池供电 特性: Simple APC adjustment via an external resistor Continuous (CW) or pulsed operation of up to 300 kHz Laser diode current of up to 100 mA Adjustable watchdog for input signals Soft power-on and thermal shutdown protection Operation at 2.7 to 6 V with two to four AA/AAA cells Protection against reverse polarity 应用: Battery supplied LD modules Laser pointers 下载 iC-WJB 数据手册 下载封装资料 MSOP, SSOP, TSSOP 下载封装资料 SO 更多信息关于 iC-WJB (iC-Haus 英文网站)
iC-WK 系列	Universal Laser Saver® 激光管驱动器, CW 操作 2.4 V 起 特性: iC-WK MSOP8 AEC-Q100 qualified (Grade 3) CW operation up to 90 mA from 2.4 to 6 V supply voltage Rapid soft start after power-on typical within 70 μs Simple power adjustment via the external resistor Control loop accuracy better than 1% with changes in temperature, supply voltage and load current Integrated reverse polarity protection for the iC and laser diode Strong suppression of transients with very small external capacitors; integrated flyback path Permanent shutdown with excessive temperature and overcurrent (i.e. if the laser diode is damaged or the feedbackcurrent path fails) Two feedback inputs permit all current LD types to be used (N/P/M configurations) Modulation via the feedback inputs is possible Wide monitor current range from 10 μA to 2.5 mA iC-WK with additional spike detection at monitor input MDA 应用: Battery-powered LD modules Laser Pointers Levelling lasers Bar-code readers 下载 iC-WK / iC-WKL 数据手册 下载评估板说明 iC-WK 下载 WK1D 模块手册 下载 WK2D 模块手册 下载 iC-WK / iC-WKL 应用笔记 下载 WK 系列选型表 下载封装资料 MSOP, SSOP, TSSOP 下载封装资料 SO 更多信息关于 iC-WK / iC-WKL (iC-Haus 英文网站)
iC-WKM	M-型CW激光管驱动器, 优化 (蓝色) M-型激光管 特性: Optimised for M-type laser diodes (single supply, case grounded) CW operation up to 350 mA from a single supply of up to 15 V Rapid soft start after power-on Simple power adjustment via an external resistor Control loop accuracy better than 3% with changes in temperature, supply voltage and load current Integrated reverse polarity protection for the iC and laser diode Strong suppression of transients with very small external capacitors; integrated flyback path Two feedback inputs permit all current LD types to be used (M/P/N configurations) Modulation via the feedback inputs is possible Wide monitor current range from 2.5 µA to 6.25 mA 应用: Blue laser diodes LD modules 下载 iC-WKM 简单介绍 下载 iC-WKM 数据手册 下载评估板说明 iC-WKM 下载 WK 系列选型表 下载封装资料 DFN, QFN 下载封装资料 SO 更多信息关于 iC-WKM (iC-Haus 英文网站)
iC-WKN	N-型CW激光管驱动器, 优化N-型激光管 特性: CW operation up to 300 mA from 2.4 to 15 V supply voltage Rapid soft start after power-on Simple power adjustment via an external resistor Control loop accuracy better than 1.5% with changes in temperature, supply voltage and load current Integrated reverse polarity protection for the iC and laser diode Strong suppression of transients with very small external capacitors; integrated flyback path Two feedback inputs permit all current LD types to be used (M/P/N configurations) Modulation via the feedback inputs is possible Wide monitor current range from 2.5 µA to 6.25 mA 应用: Laser pointers LD modules Laser levels Barcode readers Distance measuring sensors 下载 iC-WKN 简单介绍 下载 iC-WKN 数据手册 下载评估板说明 iC-WK 下载 WK 系列选型表 下载封装资料 DFN, QFN 下载封装资料 SO 更多信息关于 iC-WKN (iC-Haus 英文网站)
iC-WKP	P-型CW激光管驱动器, 优化P-型激光管 特性: Optimised for P-type laser diodes (case grounded) CW operation up to 350 mA from 3 to 15 V supply voltage Rapid soft start after power-on Simple power adjustment via an external resistor Control loop accuracy better than 2% with changes in temperature, supply voltage and load current Integrated reverse polarity protection for the iC and laser diode Strong suppression of transients with very small external capacitors; integrated flyback path Second feedback input MDA also permits the operation of N-type laser diodes Modulation via the feedback inputs is possible Wide monitor current range from 2.5 µA to 6.25 mA 应用: Laser pointers LD modules Laser levels Barcode readers Distance measuring sensors 下载 iC-WKP 简单介绍 下载 iC-WKP 数据手册 下载 WK 系列选型表 下载封装资料 DFN, QFN 下载封装资料 SO 更多信息关于 iC-WKP (iC-Haus 英文网站)

回产品展示网页

iC-Haus 中国代表处 - 电话：+86 755 8233-3310 - 邮箱：contact@ichauschina.com