iC-Haus China - 输入/输出芯片

Wafer

I/O iCs

输入/输出芯片

iC-JX

iC-Haus 输入/输出iC提供接口给工业传感器和控制系统，包括 SSI, BiSS 和 IO-Link 协议。

应用:

工业传感器
控制面板
PLC
绝对位置测量
电机反馈和驱动系统
安全相关系统
多传感器系统

iC-Haus 输入/输出芯片:

iC-GD	通用输入/输出接口特性: Two channels, each configurable as input or output Low-side and high-side switches with up to 500 mA per channel, current limitation, current measurement, status messages, cable break detection, freewheeling diode, reverse polarity protection, optional parallel connection of both channels Output of ±10 V or 0/4...20 mA with 14-bit resolution Measurement of ±10 V, ±1 V, ±100 mV, ±10 mV, ±20 mA or 4...20 mA with 16-bit resolution Input for Pt 100, Pt 1000 temperature sensors Multi-function 32-bit counter Digital output with pulse-width modulation option Internal temperature measurement with 1 K resolution SPI interface Calibration and configuration by external EEPROM via serial interface Error message at overtemperature, overload and undervoltage Shutdown of the outputs in case of error 应用: SPS control system Data acquisition Sensor interfaces 下载 iC-GD 简单介绍更多信息关于 iC-GD (iC-Haus 英文网站)
iC-GF	IO-Link 收发器用于 IO-Link Slave 特性: IO-Link compliant slave transceiver Dual channel current-limited switches, configurable for high-side, low-side and push-pull operation with tristate function Configuration via pins or SPI interface Protection against reverse polarity Output current of up to 150 mA per channel The channels can be inverted for antivalent output Sensor communication request function (IO-Link wake-up) Wide supply voltage range of 9 to 30 V Sensor parametrisation via a feedback channel Error detection with hysteresis and driver shutdown for excess temperature, overload and undervoltage Switching converters and linear regulators for 3.3/5 V voltage generation 应用: IO-Link slaves and IO-Link sensor interface Digital sensors Light barriers Proximity switches 下载 iC-GF 简单介绍下载 iC-GF 数据手册下载评估板安装说明 iC-GF 下载 iC-GF 软件 (无RTE) 下载 iC-GF 软件 (带RTE) 下载封装资料 DFN, QFN 更多信息关于 iC-GF (iC-Haus 英文网站)
iC-GFP	IO-Link 从机收发器特性: COM3 compliant IO-Link slave transceiver Two bidirectional channels, configurable for high-side, low-side and push-pull operation Parallel connection of both channels possible Channels can be inverted for antivalent output Output current of up to 200 mA per channel Programmable current limit Line side protected against reverse polarity Configuration via SPI interface with secured data transmission Wide supply voltage range of 4.5 to 36 V Two feedback channels supporting IO-Link wake-up Switching converter and linear regulators with 5/3.3/2.5/1.8 V On-chip digital temperature sensor Status alert output with excess temperature, overload and undervoltage Driver shutdown on errors 应用: IO-Link slaves Light barriers Proximity switches 下载 iC-GFP 简单介绍更多信息关于 iC-GFP (iC-Haus 英文网站)
iC-JRX	2x4 双向24V高端驱动器, 带单片机接口新项目设计请参考 iC-JX。如需要支持请联系 iC-Haus China。更多信息关于 iC-JRX (iC-Haus 英文网站)
iC-JX	4x4 双向24V高端驱动器, 带单片机负载诊断接口特性: 16 bidirectional input/output stages at 24 V Input/output mode programmable in 4-channel blocks Short-circuit-proof high-side drivers with diagnosis function 500 mA pulse and 150 mA permanent load driving capability Active flyback circuit Load diagnosis for driver current, output voltage and impedance (cable fractures, resistance and short circuits) 10-bit A/D converter for the generation of diagnosis measurement values Safety features (voltage monitor, temperature sensor with warning and shutdown features, power output enable pin) Variable digital filters for the debouncing of I/O signals Fast 8-bit parallel or serial SPI-compatible µC interface permits use in buses Logic supply from 3 V upwards 应用: Industrial 24 V applications Lamp switches with diagnostic features Inductive load driver circuits for relays and valves 下载 iC-JX 简单介绍下载 iC-JX 数据手册下载 iC-JX 软件下载封装资料 MQFP 更多信息关于 iC-JX (iC-Haus 英文网站)
iC-MD	48位正交信号计数器, 带RS422接收器和SPI/BiSS接口特性: Counter resolutions: 16, 24, 32 and 48 bit Counter resolutions: 16, 24, 32 and 48 bit High count frequency of up to 40 MHz Evaluation of distance-coded reference marks Cascading/bus capable via SPI and BiSS C Interface RS422, TTL, CMOS, LVDS input signals Two actuator output signals Operation from 3.3 V to 5 V Operation modes: 1-channel ABZ inputs (TTL/RS422/LVDS), 2-channels ABZ inputs (TTL), 3-channels AB inputs (TTL) Sub-system power switch offers reverse polarity protection for the overall system Loss-of-signal indicator 应用: PLC interface to linear scales and rotary encoders Motion control Quadrature encoder interfacing and processing 下载 iC-MD 简单介绍下载 iC-MD 数据手册下载评估板说明 iC-MD 下载 iC-MD 软件 (无RTE) 下载 iC-MD 软件 (带RTE) 更多信息关于 iC-MD (iC-Haus 英文网站)

iC-Haus BiSS interface iCs:

iC-BL	BiSS Line 接口主机/从机芯片，带 RS485 收发器 - (新) 特性: BiSS Line slave or master 2- and 4-wire BiSS Line interface support Full BiSS Line protocol support including Forward Error Correction (FEC) Isochronous position data measurement with low jitter On-chip RS485 line transceiver for BiSS Line point-to-point and bus structures BiSS Line to BiSS C protocol transfer Digital I/O port with CMOS drivers/receivers Sensor-sided BiSS C master interface for daisy-chaining up to 8 BiSS C slaves with data lengths up to 64 bits each Full compatibility with BiSS C and BiSS Safety SSI master interface SPI slave and SPI master interface I²C master interface Sensor supply voltage: 2.5 V, 3.3 V, or 5 V (max. 200 mA) Operation at 5 V or from 7 V to 30 V supply Operating temperature range of –40°C to +105°C 应用: One-cable technology BiSS Line master or slave implementations 2- and 4-wire sensor interfaces Motor feedback Position sensing Robotics Long distance SPI links Robust multi-sensor data communication BiSS C to BiSS Line adapter Device diagnosis and condition monitoring 下载 iC-BL 简单介绍更多信息关于 iC-BL (iC-Haus 英文网站)
iC-MB3	BiSS接口Master主机, 1通道/3从机, SPI/并行控制器接口特性: Bidirectional BiSS communication with up to 3 slaves Supports BiSS C unidirectional, BiSS B, SSI and extended SSI Synchronous acquisition with data rates up to 10 Mbit/s BiSS B slave register operations Automatic line delay compensation Data lengths of up to 64 bit for sensor data per slave CRC verification with up to 8 bits per slave SPI or parallel interface to host e.g. microcontroller Single 3 V to 5 V supply 应用: BiSS B, BiSS C unidirectional, SSI sensor communication master Device communication in multi-sensor sytems Position acquisition with encoders Drives and motor-feedback systems 芯片 iC-MB3 有 BiSS-B, BiSS-C Unidirectional (单向) 和 SSI 通信功能，但是不建议使用 BiSS-C 寄存器通信。iC-MB3 需要 BiSS-C 寄存器通信在主机实现协议。新项目需要 BiSS-C 寄存器通信请参考 iC-MB4。下载 iC-MB3 数据手册更多信息关于 iC-MB3 (iC-Haus 英文网站)
iC-MB4	BiSS接口主机, 2通道/8从机, RS422收发器, 双SPI接口特性: Bidirectional BiSS communication with up to 8 slaves Supports BiSS C, BiSS B, SSI and extended SSI Synchronous acquisition with data rates up to 10 Mbit/s Configurable interface with TTL, CMOS, RS422 or LVDS Slave register operations during cyclic data transfers Automatic line delay compensation Data lengths of up to 64 bit for sensor data per slave CRC verification with up to 16 bits per slave 64 bytes memory for bidirectional register access SPI or parallel interface to host e.g. microcontroller Single 3 V to 5 V supply 应用: Device communication in multi-sensor sytems Position acquisition with encoders Drives and motor-feedback systems 下载 iC-MB4 简单介绍下载 iC-MB4 数据手册下载评估板说明 iC-MB4 下载 iC-MB4 软件 (无RTE) 下载 iC-MB4 软件 (带RTE) 下载 BiSS-C 协议说明更多信息关于 iC-MB4 (iC-Haus 英文网站)
iC-MCB	SPI-to-BiSS 从机桥, 带 RS-422 收发器特性: BiSS Interface slave Full BiSS protocol support Two data channel configurable Three slave ID occupiable Single cycle data buffer of 64 byte organized in multiple banks for simultaneous access Built-in control communication RS422 line driver/receiver for BiSS/SSI point-to-point network BiSS bus structure capable SPI slave interface for sensor data provided by microcontroller BiSS safety related features (16 bit CRC + CRC start value) BiSS timeout: adaptive, 2 μs, 20 μs SSI protocol support Operation from 3.0 V to 5.5V Operating temperature range of -40°C to +125°C Space-saving 16-pin QFN package 应用: BiSS slave implementation Multiple sensor devices Encoder Torque sensor Inclinometer Acceleration sensor Safety light curtain BiSS diagnosis extension Condition monitoring extension 下载 iC-MCB 简单介绍下载 iC-MCB 数据手册下载评估板说明 iC-MCB 更多信息关于 iC-MCB (iC-Haus 英文网站)
iC-MCW	RS422 BiSS 看门狗, 带 SPI 特性: Acquisition of BiSS Single Cycle Data Acquisition of BiSS Control Data Monitoring of BiSS communication status Error diagnostics for debugging Pin for simple error indication Auto compensation of line delay and conversion times Internal 14-bit BiSS frame counter Built-In RS422 receiver for direct BiSS interfacing Support of BiSS data transfer rates of up to 10 MBit/s Serial controller communication via SPI™ slave interface Support of interrupt-output Built-In system and high speed sample clock generation 3.3 to 5 V supply (+/-10%) Operational temperature -40 to +125 °C 应用: BiSS communication monitoring BiSS Safety extension of BiSS standard drives 下载 iC-MCW 简单介绍下载 iC-MCW 数据手册下载评估板说明 iC-MCW 更多信息关于 iC-MCW (iC-Haus 英文网站)

回产品展示网页

iC-Haus 中国代表处 - 电话：+86 755 8233-3310 - 邮箱：contact@ichauschina.com