English

• 主页
• 新闻
• 产品
• BiSS 接口
• 下载
• 视频
• 关于我们
• 联系

iC-Haus 输入/输出iC提供接口给工业传感器和控制系统，包括 SSI, BiSS 和 IO-Link 协议。

应用:

• 工业传感器
• 控制面板
• PLC
• 绝对位置测量
• 电机反馈和驱动系统
• 安全相关系统
• 多传感器系统

iC-Haus 输入/输出芯片:

iC-GD	通用输入/输出接口 特性: Two channels, each configurable as input or output Low-side and high-side switches with up to 500 mA per channel, current limitation, current measurement, status messages, cable break detection, freewheeling diode, reverse polarity protection, optional parallel connection of both channels Output of ±10 V or 0/4...20 mA with 14-bit resolution Measurement of ±10 V, ±1 V, ±100 mV, ±10 mV, ±20 mA or 4...20 mA with 16-bit resolution Input for Pt 100, Pt 1000 temperature sensors Multi-function 32-bit counter Digital output with pulse-width modulation option Internal temperature measurement with 1 K resolution SPI interface Calibration and configuration by external EEPROM via serial interface Error message at overtemperature, overload and undervoltage Shutdown of the outputs in case of error 应用: SPS control system Data acquisition Sensor interfaces 下载 iC-GD 数据手册 下载 iC-GD 软件 (无RTE) 下载 iC-GD 软件 (带RTE) 更多信息关于 iC-GD (iC-Haus 英文网站)
iC-GF	IO-Link 收发器用于 IO-Link Slave 特性: IO-Link compliant slave transceiver Dual channel current-limited switches, configurable for high-side, low-side and push-pull operation with tristate function Configuration via pins or SPI interface Protection against reverse polarity Output current of up to 150 mA per channel The channels can be inverted for antivalent output Sensor communication request function (IO-Link wake-up) Wide supply voltage range of 9 to 30 V Sensor parametrisation via a feedback channel Error detection with hysteresis and driver shutdown for excess temperature, overload and undervoltage Switching converters and linear regulators for 3.3/5 V voltage generation 应用: IO-Link slaves and IO-Link sensor interface Digital sensors Light barriers Proximity switches 下载 iC-GF 简单介绍 下载 iC-GF 数据手册 下载评估板安装说明 iC-GF 下载 iC-GF 软件 (无RTE) 下载 iC-GF 软件 (带RTE) 下载封装资料 DFN, QFN 更多信息关于 iC-GF (iC-Haus 英文网站)
iC-GFP	IO-Link 从机收发器 特性: COM3 compliant IO-Link slave transceiver Two bidirectional channels, configurable for high-side, low-side and push-pull operation Parallel connection of both channels possible Channels can be inverted for antivalent output Output current of up to 200 mA per channel Programmable current limit Line side protected against reverse polarity Configuration via SPI interface with secured data transmission Wide supply voltage range of 4.5 to 36 V Two feedback channels supporting IO-Link wake-up Switching converter and linear regulators with 5/3.3/2.5/1.8 V On-chip digital temperature sensor Status alert output with excess temperature, overload and undervoltage Driver shutdown on errors 应用: IO-Link slaves Light barriers Proximity switches 下载 iC-GFP 简单介绍 （中文版） 下载 iC-GFP 简单介绍 (英文版) 下载 iC-GFP 数据手册 下载 iC-GFP 软件 (无RTE) 下载 iC-GFP 软件 (带RTE) 更多信息关于 iC-GFP (iC-Haus 英文网站)
iC-JX	4x4 双向24V高端驱动器, 带单片机负载诊断接口 特性: 16 bidirectional input/output stages at 24 V Input/output mode programmable in 4-channel blocks Short-circuit-proof high-side drivers with diagnosis function 500 mA pulse and 150 mA permanent load driving capability Active flyback circuit Load diagnosis for driver current, output voltage and impedance (cable fractures, resistance and short circuits) 10-bit A/D converter for the generation of diagnosis measurement values Safety features (voltage monitor, temperature sensor with warning and shutdown features, power output enable pin) Variable digital filters for the debouncing of I/O signals Fast 8-bit parallel or serial SPI-compatible µC interface permits use in buses Logic supply from 3 V upwards 应用: Industrial 24 V applications Lamp switches with diagnostic features Inductive load driver circuits for relays and valves 下载 iC-JX 简单介绍 下载 iC-JX 数据手册 下载 iC-JX 软件 下载封装资料 MQFP 更多信息关于 iC-JX (iC-Haus 英文网站)
iC-MD	48位正交信号计数器, 带RS422接收器和SPI/BiSS接口 特性: Counter resolutions: 16, 24, 32 and 48 bit Counter resolutions: 16, 24, 32 and 48 bit High count frequency of up to 40 MHz Evaluation of distance-coded reference marks Cascading/bus capable via SPI and BiSS C Interface RS422, TTL, CMOS, LVDS input signals Two actuator output signals Operation from 3.3 V to 5 V Operation modes: 1-channel ABZ inputs (TTL/RS422/LVDS), 2-channels ABZ inputs (TTL), 3-channels AB inputs (TTL) Sub-system power switch offers reverse polarity protection for the overall system Loss-of-signal indicator 应用: PLC interface to linear scales and rotary encoders Motion control Quadrature encoder interfacing and processing 下载 iC-MD 简单介绍 下载 iC-MD 数据手册 下载评估板说明 iC-MD 下载 iC-MD 软件 (无RTE) 下载 iC-MD 软件 (带RTE) 更多信息关于 iC-MD (iC-Haus 英文网站)

iC-Haus BiSS interface iCs:

iC-BL	BiSS Line 接口主机/从机芯片，带 RS485 收发器 - (新) 特性: BiSS Line slave or master 2- and 4-wire BiSS Line interface support Full BiSS Line protocol support including Forward Error Correction (FEC) Isochronous position data measurement with low jitter On-chip RS485 line transceiver for BiSS Line point-to-point and bus structures BiSS Line to BiSS C protocol transfer Digital I/O port with CMOS drivers/receivers Sensor-sided BiSS C master interface for daisy-chaining up to 8 BiSS C slaves with data lengths up to 64 bits each Full compatibility with BiSS C and BiSS Safety SSI master interface SPI slave and SPI master interface I²C master interface Sensor supply voltage: 2.5 V, 3.3 V, or 5 V (max. 200 mA) Operation at 5 V or from 7 V to 30 V supply Operating temperature range of –40°C to +105°C 应用: One-cable technology BiSS Line master or slave implementations 2- and 4-wire sensor interfaces Motor feedback Position sensing Robotics Long distance SPI links Robust multi-sensor data communication BiSS C to BiSS Line adapter Device diagnosis and condition monitoring 下载 iC-BL 简单介绍 (中文版) 下载 iC-BL 简单介绍 (英文版) 下载 iC-BLM 数据手册 下载 iC-BLS 数据手册 下载评估板说明 BL1D 下载评估板说明 BL3M 下载 BiSS Line 软件 (无RTE) 下载 BiSS Line 软件 (带RTE) 更多信息关于 iC-BL (iC-Haus 英文网站)
iC-MB4	BiSS接口主机, 2通道/8从机, RS422收发器, 双SPI接口 特性: Bidirectional BiSS communication with up to 8 slaves Supports BiSS C, BiSS B, SSI and extended SSI Synchronous acquisition with data rates up to 10 Mbit/s Configurable interface with TTL, CMOS, RS422 or LVDS Slave register operations during cyclic data transfers Automatic line delay compensation Data lengths of up to 64 bit for sensor data per slave CRC verification with up to 16 bits per slave 64 bytes memory for bidirectional register access SPI or parallel interface to host e.g. microcontroller Single 3 V to 5 V supply 应用: Device communication in multi-sensor sytems Position acquisition with encoders Drives and motor-feedback systems 下载 iC-MB4 简单介绍 (中文版) 下载 iC-MB4 简单介绍 (英文版) 下载 iC-MB4 数据手册 下载评估板说明 iC-MB4 下载 iC-MB4 软件 (无RTE) 下载 iC-MB4 软件 (带RTE) 下载 BiSS-C 协议说明 更多信息关于 iC-MB4 (iC-Haus 英文网站)
iC-MCB	SPI-BiSS 从机桥, 带 RS-422 收发器 特性: BiSS Interface slave Full BiSS protocol support Two data channel configurable Three slave ID occupiable Single cycle data buffer of 64 byte organized in multiple banks for simultaneous access Built-in control communication RS422 line driver/receiver for BiSS/SSI point-to-point network BiSS bus structure capable SPI slave interface for sensor data provided by microcontroller BiSS safety related features (16 bit CRC + CRC start value) BiSS timeout: adaptive, 2 μs, 20 μs SSI protocol support Operation from 3.0 V to 5.5V Operating temperature range of -40°C to +125°C Space-saving 16-pin QFN package 应用: BiSS slave implementation Multiple sensor devices Encoder Torque sensor Inclinometer Acceleration sensor Safety light curtain BiSS diagnosis extension Condition monitoring extension 下载 iC-MCB 简单介绍 (中文版) 下载 iC-MCB 简单介绍 (英文版) 下载 iC-MCB 数据手册 下载评估板说明 iC-MCB 更多信息关于 iC-MCB (iC-Haus 英文网站)
iC-MCW	RS422 BiSS 看门狗, 带 SPI 特性: Acquisition of BiSS Single Cycle Data Acquisition of BiSS Control Data Monitoring of BiSS communication status Error diagnostics for debugging Pin for simple error indication Auto compensation of line delay and conversion times Internal 14-bit BiSS frame counter Built-In RS422 receiver for direct BiSS interfacing Support of BiSS data transfer rates of up to 10 MBit/s Serial controller communication via SPI™ slave interface Support of interrupt-output Built-In system and high speed sample clock generation 3.3 to 5 V supply (+/-10%) Operational temperature -40 to +125 °C 应用: BiSS communication monitoring BiSS Safety extension of BiSS standard drives 下载 iC-MCW 简单介绍 (中文版) 下载 iC-MCW 简单介绍 (英文版) 下载 iC-MCW 数据手册 下载评估板说明 iC-MCW 更多信息关于 iC-MCW (iC-Haus 英文网站)

回产品展示网页

iC-Haus 中国代表处 - 电话：+86 755 8233-3310 - 邮箱：contact@ichauschina.com