iC-DN
|
200 mA 低端开关用于 4 V 到 36 V 输入/输出去耦合
特性:
- 36 V lowside switch/level shifter
- Decoupling of input and output voltages (SOT23-6L) permits control by 5 V logic
- 200 mA of output current
- Short-circuit protected
- Output with an active freewheeling circuit
- On-chip over-temperature protection
- 4 to 36 V input voltage range
- Input with hysteresis
- Wide temperature range of -40 to 120 °C
应用:
- Lowside switch for industrial applications, such as relays, inductive proximity sensors and light barriers
 下载 iC-DN 的技术文档
更多信息关于 iC-DN (iC-Haus 英文网站)
|
|
iC-DP
|
200 mA 高端开关和电平转换用于 4 V 到 36 V 输入/输出去耦合
特性:
- 36 V highside switch/level shifter
- P-channel output driver without charge pump for short activation time
- Decoupling of input and output voltages (SOT23-6L) permits control by 5 V logic
- 200 mA of output current
- Short-circuit protected
- Output with an active freewheeling circuit
- On-chip over-temperature protection
- 4 to 36 V input voltage range
- Input with hysteresis
- Wide temperature range of -40 to 120 °C
应用:
- Highside switch for industrial applications, such as relays, inductive proximity sensors and light barriers
下载 iC-DP 的技术文档
更多信息关于 iC-DP (iC-Haus 英文网站)
|
|
iC-DX
|
数字传感器输出驱动器
特性:
- Configurable high-side, low-side and push-pull operation
- Current limited output (< 450 mA)
- Reverse polarity protection
- 150 mA output current
- Wide supply voltage range from 8 to 30 V
- Shutdown with overtemperature
- Integrated free-wheeling diode for inductive loads
- Sensor supply voltage output of 5 V, 10 mA
应用:
- Digital sensors
- Light barriers
- Proximity switches
下载 iC-DX 系列简单介绍 (中文版)
下载 iC-DX 的技术文档
下载 iC-DX 的评估套资料
更多信息关于 iC-DX (iC-Haus 英文网站)
|
|
iC-DX3
|
数字传感器输出驱动器
特性:
- Configurable high-side, low-side and push-pull operation
- Current limited output (< 450 mA)
- Reverse polarity protection
- 150 mA output current
- Wide supply voltage range from 8 to 30 V
- 5 μs input filter for spike suppression
- Shutdown with overtemperature
- Integrated free-wheeling diode for inductive loads
- Sensor supply voltage output of 3.3 V, 10 mA
应用:
- Digital sensors
- Light barriers
- Proximity switches
下载 iC-DX 系列简单介绍 (中文版)
下载 iC-DX3 的技术文档
更多信息关于 iC-DX3 (iC-Haus 英文网站)
|
|
iC-DXC
|
数字传感器输入输出驱动器
特性:
- Configurable high-side, low-side and push-pull operation
- Current limited output (< 450 mA)
- Reverse polarity protection
- 200 mA output current
- 5 μs input filter for spike suppression
- I/O-Link compliant
- Wide supply voltage range from 8 to 30 V
- Shutdown with overtemperature
- Integrated free-wheeling diode for inductive loads
- Sensor supply voltage output of 5 V, 10 mA
应用:
- Digital sensors
- Light barriers
- Proximity switches
下载 iC-DX 系列简单介绍 (中文版)
下载 iC-DXC 的技术文档
下载 iC-DXC 的评估套资料
更多信息关于 iC-DXC (iC-Haus 英文网站)
|
|
iC-DXC3
|
数字传感器输入输出驱动器
特性:
- Configurable high-side, low-side and push-pull operation
- Current limited output (< 450 mA)
- Reverse polarity protection
- 200 mA output current
- 5 μs input filter for spike suppression
- I/O-Link compliant
- Wide supply voltage range from 8 to 30 V
- Shutdown with overtemperature
- Integrated free-wheeling diode for inductive loads
- Sensor supply voltage output of 3.3 V, 10 mA
应用:
- Digital sensors
- Light barriers
- Proximity switches
下载 iC-DX 系列简单介绍 (中文版)
下载 iC-DXC3 的技术文档
更多信息关于 iC-DXC3 (iC-Haus 英文网站)
|
|
iC-GD
|
通用输入/输出接口
特性:
- Two channels, each configurable as input or output
- Low-side and high-side switches with up to 500 mA per channel, current limitation, current measurement, status messages, cable break detection, freewheeling diode, reverse polarity protection, optional parallel connection of both channels
- Output of ±10 V or 0/4...20 mA with 14-bit resolution
- Measurement of ±10 V, ±1 V, ±100 mV, ±10 mV, ±20 mA or 4...20 mA with 16-bit resolution
- Input for Pt 100, Pt 1000 temperature sensors
- Multi-function 32-bit counter
- Digital output with pulse-width modulation option
- Internal temperature measurement with 1 K resolution
- SPI interface
- Calibration and configuration by external EEPROM via serial interface
- Error message at overtemperature, overload and undervoltage
- Shutdown of the outputs in case of error
应用:
- SPS control system
- Data acquisition
- Sensor interfaces
下载 iC-GD 的技术文档
下载 iC-GD 的评估套资料
下载 iC-GD 的软件
更多信息关于 iC-GD (iC-Haus 英文网站)
|
|
iC-GF
|
IO-Link 收发器用于 IO-Link Slave
特性:
- IO-Link compliant slave transceiver
- Dual channel current-limited switches, configurable for high-side, low-side and push-pull operation with tristate function
- Configuration via pins or SPI interface
- Protection against reverse polarity
- Output current of up to 150 mA per channel
- The channels can be inverted for antivalent output
- Sensor communication request function (IO-Link wake-up)
- Wide supply voltage range of 9 to 30 V
- Sensor parametrisation via a feedback channel
- Error detection with hysteresis and driver shutdown for excess temperature, overload and undervoltage
- Switching converters and linear regulators for 3.3/5 V voltage generation
应用:
- IO-Link slaves and IO-Link sensor interface
- Digital sensors
- Light barriers
- Proximity switches
下载 iC-GF 的技术文档
下载 iC-GF 的评估套资料
下载 iC-GF 的软件
更多信息关于 iC-GF (iC-Haus 英文网站)
|
|
iC-GFP
|
IO-Link 从机收发器
特性:
- COM3 compliant IO-Link slave transceiver
- Two bidirectional channels, configurable for high-side, low-side and push-pull operation
- Parallel connection of both channels possible
- Channels can be inverted for antivalent output
- Output current of up to 200 mA per channel
- Programmable current limit
- Line side protected against reverse polarity
- Configuration via SPI interface with secured data transmission
- Wide supply voltage range of 4.5 to 36 V
- Two feedback channels supporting IO-Link wake-up
- Switching converter and linear regulators with 5/3.3/2.5/1.8 V
- On-chip digital temperature sensor
- Status alert output with excess temperature, overload and undervoltage
- Driver shutdown on errors
应用:
- IO-Link slaves
- Light barriers
- Proximity switches
下载 iC-GFP 简单介绍 （中文版）
下载 iC-GFP 的技术文档
下载 iC-GFP 的评估套资料
下载 iC-GFP 的软件
更多信息关于 iC-GFP (iC-Haus 英文网站)
|
|
iC-JX
|
4x4 双向24V高端驱动器, 带单片机负载诊断接口
特性:
- 16 bidirectional input/output stages at 24 V
- Input/output mode programmable in 4-channel blocks
- Short-circuit-proof high-side drivers with diagnosis function
- 500 mA pulse and 150 mA permanent load driving capability
- Active flyback circuit
- Load diagnosis for driver current, output voltage and impedance (cable fractures, resistance and short circuits)
- 10-bit A/D converter for the generation of diagnosis measurement values
- Safety features (voltage monitor, temperature sensor with warning and shutdown features, power output enable pin)
- Variable digital filters for the debouncing of I/O signals
- Fast 8-bit parallel or serial SPI-compatible µC interface permits use in buses
- Logic supply from 3 V upwards
应用:
- Industrial 24 V applications
- Lamp switches with diagnostic features
- Inductive load driver circuits for relays and valves
下载 iC-JX 的技术文档
下载 iC-JX 的评估套资料
下载 iC-JX 的软件
更多信息关于 iC-JX (iC-Haus 英文网站)
|
|
iC-MD
|
48位正交信号计数器, 带RS422接收器和SPI/BiSS接口
特性:
- Counter resolutions: 16, 24, 32 and 48 bit
- Counter resolutions: 16, 24, 32 and 48 bit
- High count frequency of up to 40 MHz
- Evaluation of distance-coded reference marks
- Cascading/bus capable via SPI and BiSS C Interface
- RS422, TTL, CMOS, LVDS input signals
- Two actuator output signals
- Operation from 3.3 V to 5 V
- Operation modes: 1-channel ABZ inputs (TTL/RS422/LVDS), 2-channels ABZ inputs (TTL), 3-channels AB inputs (TTL)
- Sub-system power switch offers reverse polarity protection for the overall system
- Loss-of-signal indicator
应用:
- PLC interface to linear scales and rotary encoders
- Motion control
- Quadrature encoder interfacing and processing
下载 iC-MD 的技术文档
下载 iC-MD 的评估套资料
下载 iC-MD 的软件
更多信息关于 iC-MD (iC-Haus 英文网站)
|
English
- 哔哩哔哩: iC-Haus